Cp-electronics VITM 6 Bedienungsanleitung PDF herunterladen

VITM6-S

Vitesse modular starter for dimming systems

VITM6-E

Vitesse modular extender for dimming systems

202mm

150mm

146mm

127mm

122mm

75mm

Fixing points

M6 (1/4”)

The Vitesse modular system is a cost effective method of providing power and control for lighting installations in indus-

trial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected using the

spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors. The modular

approach allows for between 4 and 16 luminaires to be connected. The VITM6 is for use with dimming luminaires. The

VITM6-SELVMOD converter provides SELV switch inputs to allow digital dimming whilst also overcoming the require-

ments of the IEE 17

edition wiring regulations cost effectively.

9 pole interface

connector and lead

supplied with

detectors

VITM6-SELVMOD

Pluggable

dimming switch

module

Channel for channel nuts (zebs)

Removable gland plate with

3 x Ø20mm knockouts

3 x Ø20mm knockouts for rear

cable entry

4 x key slots to accept M6 (1/4”)

fixings

BESA box fixings

Warning. This device works at mains voltage. Be sure to take care when working with electricity.

 The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.

 Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.

Height - allow 150mm for total height of unit (including connectors and cable)

Overview

Vitesse Modular 6 - Dimming Modules

Product Guide

VITM6

System Components

Installation

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Product Guide

VITM6-S Vitesse modular starter for dimming systems VITM6-E Vitesse modular extender for dimming systems 202mm 150mm 146mm 127mm 122mm 75mm Fixing

Seite 2

2 Luminaire connections / Lead colours Dim + Red Dim - White Permanent Live Black (6 core only) Neutral Blue Dim + Dim -  All wiring should b

Seite 3 - Wiring & Emergency Test

3 Local lighting switch and local emergency test switch Emergency test using power interruption DO NOT WIRE ACROSS PHASES N E L Local lighting swit

Seite 4

4 Emergency test using central switch DO NOT WIRE ACROSS PHASES N E L Multiple boxes Central emergency test switch A local lighting switch may sti

Seite 5 - Automatic on, automatic off

5 N E L Sensor Automatic on, automatic off Detector lead supplied with detector. Where multiple detectors connect to a single box a dual lead is av

Seite 6

6 N E L Sensor  Up position  Short press on  Long press dimming level up  Down position  Short press off  Long press dimming level down

Seite 7 - VITM6-SELVMOD Dimming Module

7 Settings SELV switch connector  No mains voltage switch wires routed along walls removes the need for RCD protection under the IEE 17th Edition

Seite 8 - Ratings

8 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notic

Verwandte Modelle: VITM6 | VITM6 (old ceiling rose) |

Kommentare zu diesen Handbüchern

Keine Kommentare

Cp-electronics VITM 6 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Relais Cp-electronics VITM 6 herunter. CP Electronics VITM 6 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: VITM6 | VITM6 (old ceiling rose) |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Cp-electronics VITM 6