Cp-electronics VITM4 (old ceiling rose) Bedienungsanleitung PDF herunterladen

The Vitesse modular system is a cost effective method of providing power and control for lighting installations in indus-

trial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected using the

spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors. The modular

approach allows for between 4 and 16 luminaires to be connected. The VITM4 is for use with non-dimming luminaires.

The VITM4-SELVMOD converter provides a cost effective SELV switch input for overcoming the requirements of the IEE

edition wiring regulations.

6 pole interface

connector and lead

supplied with

detectors

VITM4-S

Vitesse modular starter for non-dimming systems

VITM4-E

Vitesse modular extender for non-dimming systems

VITM4-SELVMOD

Pluggable SELV

switching module

Channel for channel nuts (zebs)

Removable gland plate with

3 x Ø20mm knockouts

3 x Ø20mm knockouts for rear

cable entry

4 x key slots to accept M6 (1/4”)

fixings

BESA box fixings

202mm

150mm

146mm

127mm

122mm

75mm

Fixing points

M6 (1/4”)

Warning. This device works at mains voltage. Be sure to take care when working with electricity.

The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.

Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.

Height - allow 150mm for total height of unit (including connectors and cable)

Overview

Vitesse Modular 4 - Switching Modules

Product Guide

System Components

Installation

VITM4

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Product Guide

The Vitesse modular system is a cost effective method of providing power and control for lighting installations in indus-trial, commercial and retai

Seite 2 - DO NOT WIRE ACROSS

2 Permanent Live Neutral Earth Switched live Absence detector Live Local lighting switch and local emergency test switch N E L Local emergency

Seite 3 - Absence detector connections

3 Timer disabled 5 minutes 10 minutes 15 minutes Time delay settings SELV switch connector (observe polarity) N E L N E L Sensor Detector lead s

Seite 4 - Ratings

4 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice

Kommentare zu diesen Handbüchern

Keine Kommentare

Cp-electronics VITM4 (old ceiling rose) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Relais Cp-electronics VITM4 (old ceiling rose) herunter. CP Electronics VITM4 (old ceiling rose) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Cp-electronics VITM4 (old ceiling rose)