Cp-electronics VITM4-2CH-2S Bedienungsanleitung PDF herunterladen

 The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-

dustrial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected

using the spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors.

The modular approach allows for between 4 and 16 luminaires to be connected.

 The VITM4-2CH-2S is a two channel, non-dimming distribution box for use in applications that require two independ-

ent supplies for switching lighting or lighting and ventilation circuits. For example this product is ideal for installations

that have essential and non-essential supplies for lighting circuits and require common switching using presence de-

tectors. This product provides connections for separate Live, Neutral and Permanent Live inputs.

VITM4-S-2CH-2S

Vitesse modular starter for non-dimming systems

VITM4-E-2CH-2S

Vitesse modular extender for non-dimming systems

Channel for channel nuts (zebs)

Removable gland plate with

3 x Ø20mm knockouts

3 x Ø20mm knockouts for rear

cable entry

4 x key slots to accept M6 (1/4”)

fixings

BESA box fixings

202mm

150mm

146mm

127mm

122mm

75mm

Fixing points

Warning. This device works at mains voltage. Be sure to take care when working with electricity.

 The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.

 Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.

Height - allow 150mm for total height of unit (including connectors and cable)

9 pole interface

connector and lead

supplied with

detectors

Channel 1 Channel 2 Channel 1

Channel 2

Overview

Vitesse Modular 4 - 2 Ch / 2 supply Switching Modules

Product Guide

System Components

Installation

VITM4-2CH-2S

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - VITM4-2CH-2S

 The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-dustrial, commercial and re

Seite 2 - Connecting a detector

2  All wiring should be mains rated.  Remove wiring compartment cover.  Wire the box using the diagrams below Switched live turns the lights on

Seite 3 - Wiring

3 Local emergency test switch N1 E L1 Local emergency test switch supply 1 Emergency test using central switch N1 E Multiple boxes Emergency test us

Seite 4 - Applications

4 Window / room switching Window / room switching + Extender 2 Channel detectors The flexibility of using two channels detectors allows the following

Seite 5

5 This page intentionally left blank

Seite 6

6 This page intentionally left blank

Seite 7

7 This page intentionally left blank

Seite 8 - Ratings

8 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice

Verwandte Modelle: VITM4-2CH

Kommentare zu diesen Handbüchern

Keine Kommentare

Cp-electronics VITM4-2CH-2S Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Relais Cp-electronics VITM4-2CH-2S herunter. CP Electronics VITM4-2CH-2S User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: VITM4-2CH

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Relais Cp-electronics VITM4-2CH-2S